The KSA has readied a third satellite for launch into polar orbit to complete the first interplanetary communications network around Kerbin. The first launch failed during ascent, the second launch was successful, and now the Agency hopes to add another good launch to their record. Once in place, the two IP ComSats will allow Mission Control to contact craft anywhere in the Kerbol system, staying both high above and below the orbital plane as much as possible to improve chances of connections.
Tag Archive: probe
Nov 10 2014
#044: The Dawn of Interplanetary Comms
With the previously-failed launch of IP ComSat I, the second craft already under construction was used for its replacement. The purpose of these satellites is to achieve extremely elliptical polar orbits in order to spend the maximum amount of time above/below Kerbin for best possible line of sight to other planets in the Kerbol system. A dish capable of reaching as far as Eeloo is included on each satellite, as well as two smaller dishes to help connect craft traveling around the Kerbin system. In addition to placing IP ComSat in orbit, some existing hardware up in LKO was re-purposed to help create a more redundant communications network around Kerbin.
Nov 07 2014
#042: 2.5m Engine/Mk1-2 Recovery Trials
With the upgrades to the VAB complete, the KSA now has the ability to construct larger 2.5m craft in addition to any 1.25m rockets already under construction. Before they can launch their first 2.5m rocket, there are two new engines to test. The main lifter cluster is actually using the Bearcat engine that has been the lifter engine of choice for the KSA mostly since day one. However it has only before been clustered in pairs. A new orbital engine to replace the 1.25m RMA-3 workhorse is also in need of testing. Once the tests have proven successful, the teams can assemble a 2.5m test vehicle to put the new Mk1-2 capsule through an unkerbed orbital mission to ensure it can return safely.
Oct 29 2014
#038: IP ComSat I Ascent Failure
With the Duna I mission undergoing final construction this month for launch at the beginning of December, the KSA is using the time to put in place two new communications satellites around Kerbin that will provide links to any craft operating in interplanetary space. The R&D department recently rolled out their largest dish yet, capable of communicating as far as Eeloo. This was to be the first of two satellites orbiting high over Kerbin’s poles, and is also the first rocket to incorporate recoverable boosters.
Oct 23 2014
#035: Mu-SCAN – Munar survey & science
After proving that the technology to map planets from orbit was proven with the earlier K-SCAN mission, a new probe was assembled to make the journey to Mun to perform the same task. Here it would be much more important to obtain surface data for use in future missions, both kerbed and unkerbed. The Mu-SCAN probe also carried along a gravioli and radiation detector for a secondary mission of gathering new scientific data around Mun.
Sep 29 2014
#030: K-SCAN Mapping Satellite
Just prior to receiving two new astronauts into the program, the KSA launches its first mapping satellite into orbit around Kerbin to test new technology to gather surface data on planets from space. The instruments on board measure terrain altitude and slope, as well as vegetation and land surface to create a biome map. Future missions to Mun and other planets in the Kerbol system depend largely on the success of the technology deployed by K-SCAN.
Sep 16 2014
#029: Munar Relay Network Completion
The KSA finally recovered enough from the atmospheric asteroid explosion just over 150km west of the KSC at the end of August to complete assembly of the third Munar comsat and launch it on its mission to complete the Munar relay network. The previous attempt had ended in failure due to wrongly-tuned boosters, but Lead Engineer Simon personally oversaw the final stages of the rocket construction to ensure booster thrust was set properly. In addition to completing the communications network around Mun, once separated the transfer stage would perform a fly-through of the impact cloud kicked up when the previous Mun comsat transfer stage, still in orbit, slams into the Munar surface. Lead Scientist Wernher Von Kerman had devised a new dust collector experiment for this purpose, although the collectors are also capable of collecting interstellar particles. Finally, there was a chance to arrange a very close (1.3km) fly-by of a passing asteroid in the hopes of photographing it prior to the launch of ComSat Mun III.
Aug 18 2014
#028: Booster Overload
The KSA was finally on the verge of completing their ComSat network around Mun so they could begin sending orbital and surface missions in earnest and start to fully explore the nearest neighbor of Kerbin. The launch of ComSat Mun III arrived on schedule, although there were some problems earlier in the week – the SPH suffered a worker death and the VAB had to deal with a minor fuel fire. The VAB supervisor ensured that everything was alright, however a critical step in the launch readiness procedures was overlooked…
Aug 09 2014
#027: 1 Day, 3 Missions
The second ComSat is sent to Mun to establish a network of relay communications for any orbiting space craft. Originally designed to trail Mun’s orbit around Kerbin, ComSat Mun I failed to hold station in its leading position and now the KSA is constructing the same 3-satellite constellation as their LKO relay network. The new configuration lead to the R&D department coming up with capacitor technology for increased energy storage needed for the ComSats to survive a combined Munar night transit and Kerbol eclipse while operating. A second dish was also added – both improvements would need to be also added to ComSat Mun I at some point in the future. Flight Officer Kirk also performs 2 flights in the Mk1.2 Raker – one to video the launch from 10Km and another to drop science pods on the badlands on the other side of Kerbin.
Jul 26 2014
#026: ComSat Mun I & Munar Orbiter I
While various technologies are still under development to eventually put some kerbals on Mun, the Agency is getting ready by establishing a communications relay network that will allow an orbiting craft to maintain a constant connection to Mission Control. To do this, there will be two ComSats placed out in front and behind Mun along its orbit. The first, ComSat Mun I, is what the KSA is launching for this mission. The transfer stage that will carry the satellite into position will then enter into an orbit around Mun for science observations. After this, an impact trajectory will be set up to kick up a good amount of Munar soil that ground-based telescopes can observe. The mission is expected to take two days to complete.